Metabo 18V Hammer Drill 120Nm + 1/2" Impact Wrench 300Nm 4.0 LiHD Kit (AU68901760)

Part Number: AU68901760
 
Finance Available
Afterpay
Paypal
zip
Shipping Calculator
1. Shipping Address

Country *

State *

Postcode *

2. Shipping Estimate

Metabo 18V Hammer Drill 120Nm + 1/2" Impact Wrench 300Nm 4.0 LiHD Kit (AU68901760)

Metabo 18V Hammer Drill 120Nm SB 18 LTX BL I

Features:

  • Brushless hammer drill with maximum power for demanding applications
  • Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
  • Unique Metabo brushless motor for quick work progress and highest efficiency when drilling and screwdriving
  • Precision Stop: electronic torque control with increased precision for precise, delicate working
  • High-performance impact mechanism for optimum drilling performance
  • Spindle with hexagonal recess for screwdriver bits for working without chuck
  • Collar (Ø 43 mm) for versatile use
  • Integrated working light to illuminate the contact area
  • Robust die cast aluminium gear housing for optimum heat dissipation and long service life
  • With handy belt hook and bit case which can be fixed either on the right or left side
  • Battery packs with capacity display for checking the charge status
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
Specifications:
Voltage18 V
Maximum torque - soft60 Nm
Pulse torque65 Nm
Maximum torque, hard120 Nm
Adjustable torque1 - 20 Nm
Drill-Ø masonry16 mm
Drill-Ø steel13 mm
Drill-Ø soft wood65 mm
No-load speed0 - 500 / 0 - 1850 rpm
Maximum impact rate32300 bpm
Chuck capacity1.5 - 13 mm
Weight (including battery pack)2.2 kg
Metabo 18V Brushless Impact Wrench SSW 18 LTX 300 BL

Features:

  • Compact cordless impact driver with 1/2" male square and 300 Nm
  • Unique Metabo brushless motor for quick work progress and highest efficiency for any application
  • Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent over tightening
  • High torque machine with low kick-back torque
  • Twelve speed/torque levels for a wide range of applications
  • Integrated work light for illumination of the work area
  • Robust die cast aluminium gear housing for optimum heat dissipation and durability
  • Handy belt hook, can be fixed either on the right or left side
  • Battery packs with capacity display for checking the charge status
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack
Specifications:
Voltage18 V
Max. no-load speed0 - 2650 rpm
Maximum impact rate3750 bpm
Maximum torque300 Nm
Speed/torque levels12
Bit retainerMale square 1/2" (12.70 mm)
Vibration - Impact screwdriving7 m/s²
Vibration - Uncertainty of measurement K1.5 m/s²
Noise emission - Sound pressure level95 dB(A)
Noise emission - Sound power level (LwA)106 dB(A)
Noise emission - Uncertainty of measurement K3 dB(A)
Metabo 18V LiHD Battery Pack 4.0Ah

Features:

  • LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
  • Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
  • Patented "AIR COOLED" charging technology
  • Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
  • Processor-controlled charge and discharge management
  • Capacity display with almost no self-discharge
  • One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners
Specifications:
Voltage18V
Capacity4 Ah
Weight0.6 kg
Metabo 36V Superfast Charger ASC 30-36V

Features:

  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
Specifications:
Voltage30-36V
Includes

Hammer Drill/Screwdriver

1/2" Impact Wrench 300Nm

2 x 4.0Ah Batteries

ASC 30-36 Charger

Carry case

Part Number

AU68901760

Model Number

SB SSW 300 BL M HD 4.0

GTIN

9339742137219

Warranty

3 Years

Description

Metabo 18V Hammer Drill 120Nm + 1/2" Impact Wrench 300Nm 4.0 LiHD Kit (AU68901760)

Supplier

Metabo

Brand

Metabo

Categories

Home Page Featured

Specials

Metabo Combo Kits

Cordless Kits/Cordless Combos

Metabo Redemptions

Catalogue Specials

Cyber Monday Sale Metabo

Clearance Products

Approx. Weight (KG)

4.60

You're reviewing:

Metabo 18V Hammer Drill 120Nm + 1/2" Impact Wrench 300Nm 4.0 LiHD Kit (AU68901760)
Rating:
Quality
Value
Price

Nickname *

Summary *

Review *

Loading Questions...