Unimig Razor 200amp MIG/MMA DC Inverter PK11026

Part Number: PK11026
Finance Available
Shipping Calculator
1. Shipping Address

Country *

State *

Postcode *

2. Shipping Estimate

Unimig Razor 200amp MIG/MMA DC Inverter PK11026

Unimig 200amp MIG/MMA DC Inverter KUMJRRW200MIG

The Unimig RAZORWELD MIG 200 is a new inverter-based portable MIG welding machine with added (MMA) Stick function. The MIG function allows you to weld with both Gas Shielded and Gas-less wire applications. Easy step-less adjustment of voltage and wire feed make for easy setting of welding parameters giving excellent, professional welding results.

  • Latest IGBT inverter technology
  • MIG/MAG with Gas and Gasless wire function
  • Excellent MiG welding with CO2 gas
  • Euro style MIG torch connection
  • Internal wire feeder, gear driven
  • 1Kg to 5Kg Spools
  • Adjustable Burn Back
  • Spool Gun Connection
  • Stepless voltage and wire feed control
  • Wire Inch
  • Stick electrode (MMA) function
  • VRD (Voltage Reduction Device)
  • Excellent arc stability with all electrode
  • Hot Start - Anti Stick
  • Industrial rated
  • Solid case construction
  • IP21S rating for environmental/safety protection
  • Tolerant to variable power supply
Power Supply / Phases (V-Ph) 240v - 1 ± 15%
Duty Cycle @ 40°c as per AS/NZ60974-120% @ 200 Amps MIG
15% @ 200 Amps MMA
Output Current Range MIG 30A/15.5V - 200A/24.0V
Output Current Range MMA 10A/20.4V - 200A/28.0V
Rated Power MIG 9.4KVA
I Max MIG 33.6Amps
MMA 39.0Amps
I ieff MIG15.0mps
MMA 15.0Amps
Power factor 0.70
Protection Class IP21S
Insulation Class F
Wire Diameter Range (mm) 0.6, 0.8, 0.9, 1.0, 1.2
Dimensions Power Source Length: 470mm Width: 190mm Height: 380mm
Unimig RWX6000 Auto Darkening Welding Helmet Wide View UMRWXWH


  • 4 Arc Sensors - Maintain constant sensing and automatically switches the helmet from light to dark and back again.
  • Enhanced Viewing Area - Offers a larger viewing area for the operator. This larger viewing area enhances the operators view of the welding area
  • True Colour - High Definition Filter Technology is a feature that greatly improves the optics allowing the user to see a full spectrum of colours. It also helps to alleviate eye fatigue making it safer for extended periods of welding.
  • Operator Comfort - Lightweight Design makes wearing the welding helmet more comfortable for the operator.
  • Memory Function - Allows the operator to store different shade, sensitivity and delay options into three easily accessible pre-sets.
  • Grind Mode - Allows the operator to switch the helmet from the welding mode into a fixed shade for grinding. This function removes the need for the operator to change visors and to simply use the welding helmet for grinding when required.
  • Shade Control - Automatic Welding Lens allows the operator to switch between variable welding shades from 5-9 and 9-13. The switching speed of the lens is a very fast 0.04m/s from light to dark.
Filter dimension133 x 114 x 10 mm
View size100 x 83.4 mm
Light state4
Dark stateVariable shade 5-9 / 9-13
Power controlFully automatic
Shade controlInternal
Switching time at 23°C0.08 ms
Sensitivity & Delay time controlAdjustable (Internal)
Time from dark to light0.1s - 0.9s adjustable (Internal)
Grinding functionYes
Grinding warning flashYes
Low battery Warring indicatorYes
Operation temperature-10°C - 65°C
Storing temperature-20°C - 85°C
Power supplySolar cell, replaceable battery (CR2450 x 1PCS)
Certifications approvedCE, ANSI , CSA, AS/NZS
Unimig Flux Cored Gasless 0.9mm x 5kg Wire XA-E71T11-09-5

UNIMIG E71T-11 is a general purpose self-shielded flux-cored wire designed for all position, single-pass and limited multiple-pass lap, fillet and butt welds on mild or galvanized steed of less than 3/4" thickness. (Do not use on steel plates thicker than 3/4"). UNIMIG E71T-11 is easy to use because it requires no shielding gas. It has a very stable arc, low spatter and slag removal is easy. UNIMIG E71T-11 is commonly used in the fabrication of structural beams on outdoor


  • No Shielding Gas Needed
  • Limited Multiple-Pass or Single-Pass Welding on Mild Steel
  • Excellent for Outdoor Use, Works Well In Windy Conditions
  • Smooth Arc, Minimal Spatter
  • Works on CC Power Sources and Voltage Sensing Wire Feeders
  • DC- Straight Polarity
Unimig BZL 24 Style MIG Torch Consumable Starter Kit UMSK24


  • Packaged in a sturdy carry case, consumable starter kits are now available to from UNIMIG
  • This kit is the perfect companion to be bundled alongside machines, which the kit containing all the essential consumables for a BZL 24 Style MIG Torch.
  • Includes:
    • 1 x MIG Pliers (UMMP)
    • 2 x Conical Nozzles (PGN24CON)
    • 2 x Tip Holders (PCTH24)
    • 2 x Nozzle Springs (PCGD24)
    • 10 x 0.8mm Contact Tips (PCT0009-08)
    • 10 x 0.9 Contact Tips (PCT0009-09)
Unimig Rouge Heavy Duty Welding Gloves UMWG8

These Rogue Heavy Duty Welding Gloves are made of heat and flame resistant selected shoulder split cowhide. The standard feature of these gloves include a full sock lining for added comfort, a reinforced palm and Kevlar stitching with welted seams for added durability


  • Premium cowhide leather
  • Reinforced palm
  • Kevlar Thread


RWX6000 Welding Helmet

HYPERMIG E71T-11 Gasless Wire 0.9mm 5kg

Binzel Style 24 Consumable Starter Kit

ROGUE Welding Gloves

Part Number





Unimig Razor 200amp MIG/MMA DC Inverter PK11026


Welding Guns of Australia





Mig Multi-Function Welders

Unimig Welding Machines

Unimig Mig Machines

Catalogue Specials

Approx. Weight (KG)


You're reviewing:

Unimig Razor 200amp MIG/MMA DC Inverter PK11026

Nickname *

Summary *

Review *

Loading Questions...